اخترعت محرك دائم الحركة للابد........مطلوب مهندس كهرباء

السلام عليكم
اخترعت محرك دائم الحركة يعمل ذاتيا للابد و الحمد لله جربته في البيت و شغال تمام جدا
و بيشتغل ذاتيا و مش محتاج اي طاقة مثل البترول و الرياح و الطاقة الشمسية…الخ
و محتاج مهندس كهرباء لتصنيع اول نموذج لانتاج الكهرباء مجانا و عرض النموذج في المعارض امام الجمهور
و المحرك مسجل طلب براءة اختراع محليا و عالميا
للاتصال مسنجر الهوت ميل
free-elec
المقابلة علي المسنجر او الرد هنا

ألف مبروك ولك جزيل الشكر على هذا الانجاز العظيم

بصراحة لو الكلام ده صحيح و بيشتغل ذاتيا و مش محتاج اي طاقة مثل البترول و الرياح و الطاقة الشمسية…الخيبقى انت عملت ثورة صناعية وانا مستعد وانا فريق من 10 مهندسين ميكانيكا وكهرباء وميكاترونكس لعمل النموذج الاولى وتكاليف انتاجه

ممتاز ورائع جدا أخي ولكن نرجو تفاصيل أكثر حتى نستفيد من اختراعك ونساعدك في إتمامه وتسويقه بعون الله
ألف مبروك

انا اسف يا جماعة على هذا الرد المخيب لاامالكم لكن هذه هى الحقيقة
ان توليد اى طاقة من العدم حكاية اسطورية تخالف كل قوانين الطبيعة الاساسية و اريد ات اذكركم بالقانون الاتى (الطافة لا تفنى و لا تستحدث من العدم و لكن تتحول من صورة الى اخرى ) و جاءت نظرية الكم لتزيد ان الكتلة عبارة عن طافة مختزنة و لها نردد موجى معين و هو ماصاغه العالم الامريكى الشهير اينشتين فى شكل المعادلة الشهيرة (الطاقة = الكتلة * (مربع سرعة اللضوء)) وهى الاساس العلمى لبناء القنباة الذرية ثم المفاعلات الننوية و محطات اناتج الطاقة الكهربية النووية حيث يستخدم البلوتونيو المخصب كمادة انشطارية تتحول ذرته بالنشطار الى نظير اخر و يصاحب ذلك خروج طاقة جبارة و امجموعة من الاشعاعات
اسف لاحباط امالكم و لكن ذلك ضد قوانين الله فى الارض و كل القوانين الهندسية و لذا فذلك لايحتاج الى اختراع بل الى معجزة الهية … وشكرا

م احمد حسن
ahmd_hassan@hotmail.com

انا اسف يا جماعة على هذا الرد المخيب لاامالكم لكن هذه هى الحقيقة
ان توليد اى طاقة من العدم حكاية اسطورية تخالف كل قوانين الطبيعة الاساسية و اريد ات اذكركم بالقانون الاتى (الطافة لا تفنى و لا تستحدث من العدم و لكن تتحول من صورة الى اخرى ) و جاءت نظرية الكم لتزيد ان الكتلة عبارة عن طافة مختزنة و لها نردد موجى معين و هو ماصاغه العالم الامريكى الشهير اينشتين فى شكل المعادلة الشهيرة (الطاقة = الكتلة * (مربع سرعة اللضوء)) وهى الاساس العلمى لبناء القنباة الذرية ثم المفاعلات الننوية و محطات اناتج الطاقة الكهربية النووية حيث يستخدم البلوتونيو المخصب كمادة انشطارية تتحول ذرته بالنشطار الى نظير اخر و يصاحب ذلك خروج طاقة جبارة و امجموعة من الاشعاعات
اسف لاحباط امالكم و لكن ذلك ضد قوانين الله فى الارض و كل القوانين الهندسية و لذا فذلك لايحتاج الى اختراع بل الى معجزة الهية … وشكرا

م احمد حسن

اهلا بيك يبشمهندس
ان شاء الله ممكن في خلال اسبوع واحد نكون خلصنا اول نموذج و تشوفه بنفسك

أنا راح أطالب بسحب شهادة الهندسة منك ومن أي مهندس يصدق كلامك لأن الطاقة لا تفنى ولا تستحدث من العدم وكل اللي تعملة مجرد هراء وكلام فاضي ياما ناس على مر التاريخ( وأنا عندي صور عن المكائن اللتي لاتفنى اللي حاولو يعملونها) حاولو أن ينتجوا طاقة لا تفنى وماقدرو ,يبدولي أختراعك عبارة عن مولد يدور ويشحن نفسة في نفس الوقت وهذا مستحيل عمليا لأن Actual process occur always on the direction ofdecreasing energyأنصحك بدراسة الهندسة من جديد وحسبي الله ونعم الوكيل فيكم يا مهندسي i`h hg.lhk

اية الحكاية ياجماعة انا لاحظت في منتديات كتيرة كل اما ادخل واعرض مشروعي يشترك عضو جديد او اعضاء جدد ويهاجموني. انا طبعا قرأت كتير وعارف ان في ناس مش من مصلحتهم الشخصية ان الاختراعات دة تنتشماتقولو ياخوانة انتو تبع اي جهة بالظبط…عموما انا حنفذ المشروع يعني حنفذة ان شاء الله ارجو من المدير احمد الديب ومشرف الهندسة الكهربية والاكترونية انهم يبعتولي ايميلاتهم او يضيفني عشان نعرف نتفاهم.

اية الحكاية ياجماعة انا لاحظت في منتديات كتيرة كل اما ادخل واعرض مشروعي يشترك عضو جديد او اعضاء جدد ويهاجموني. انا طبعا قرأت كتير وعارف ان في ناس مش من مصلحتهم الشخصية ان الاختراعات دة تنتشرماتقولو ياخوانة انتو تبع اي جهة بالظبط…عموما انا حنفذ المشروع يعني حنفذة ان شاء الله ارجو من المدير احمد الديب ومشرف الهندسة الكهربية والاكترونية انهم يبعتولي ايميلاتهم او يضيفني عشان نعرف نتفاهم.

طبعا يا جماعة
لاى اقتراح جديد من البداية لابد ان يلاقى هجوم عنيف
ولكن ايه المشكلة
احنا هنخسر ايه لما نشوف الراجل هيورينا ايه وبعدين نحكم ؟؟

و كل القوانين الهندسية و لذا فذلك لايحتاج الى اختراع بل الى معجزة الهية … وشكرا

يا اخى العزيز ان كل اختراج جديد ياتى الينا يكون فى البداية مستحيل تصديقه ويكسر القوانين الهندسية

نعم قد تكون احلام الامس حقائق الغد …
ليس بعيد ان يتم اختراع اشياء خارجة عن الحقيقة …
لكن الغباء هو عدم تجريب الأفكار المبدعة …
والى الامام
اتمنى لكم التوفيق و النجاح …
المهندس

السلام عليكم
يا جماعة المشكلة ان الموضوع مش مشكلة اختراع او الهام او ابتكار جديد ممكن نقول ان زى الناس زمان ما كانتش مصدقة ان ممكن نطلع القمر و نسمع صوت الناس من الاف الاميال و غيره وغيره
لا ده حاجة مخالفة لكل القوانين اللى الانسان بنى عليها كل اختراعاته يعنى مثلا قانون اوم المختبر منذ ما يزيد عن مائة سنة مخالف لذلك و قوانين كثيرة فى مجالات اخرى كثيرة
و حتى بدون اي كسر لاي قوانين الموضوع ده كفلسفة يعنى ان الحاجة يمكن ان تاتى من العدم بدون اسباب بدون دوافع و غيره و هكذا انا ممكن انشىء كرة ارضية جديدة بدون تعب و افجرها بدون مفجر و ممكن اوصل القمر او الشمس بدون وقود
ده حتى الله تعالى شائنه لما جعل الارض فى مكان منتظم خلق سبب لذلك من طاقة تجاذب بين اجرام الكون و بعضها فما بالك بالمهندس المصرى الضعيف الى عاوز يخترع حاجة ضد قوانين الطبيعة و زعلاان ان كل ما يدخل اي منتدى الناس تقوله غلط و فاكر انه كده اينشتين
على فكرة يا مهندسين انا بنفق وقتى فى هذا الموضوع معاكم لانه حرام نكون فى القرن الواحد و العشرين و لسه عندنا ناس بتفكر فى موضوعات اتقفلت منذ القرن السابع عشر و كمان الناس دى مهندسين
يا تاس حرام ربنا هيحسابنا على الوقت ده يوم القيامة
و اسف لو كنتت حاد عليكم خصوصا الاخ المشرف العام اللى كنت فاكر انه عنده اساس هندسى مظبوط لكن يا الف خسارة بس نقول ايه
هيه دى بلدنا كل حاجة فيها ماشية بسرعة بس فى الاتجاه الغلط
و حسبى الله و نعم الوكيل فى اللى كان السبب

مهما كان الموضوع يجب أن يكون الكلام في سياق الأدب واللياقة واحترام وجهة نظر الآخرين
ولايجب مطلقا أن يحدث خلاف ذلك ولن نسمح لأي زميل ان يهاجم زملاؤه بهذا الشكل أو أن يشكك في مؤهلاتهم
أرجو من الأخ الزميل الفاضل zaman أن يتراجع عن أسلوبه وأن تكون المناقشة علمية وموضوعية بعيدة عن العصبية التي لم نشهدها هنا من قبل
وكل الشكر لمن شارك في هذا الموضوع والمواضيع الأخرى

كذلك الكلام موجه للأخ الكريم Ahmed_hassan

الفكر الهندسي يجب أن يكون فكر متفتح . مبدع و خلاق
و عدم الخوف من الوقوع في الخطأ
كمل يا علي و لا يهمك و أطلعونا على التطورات

يا جماعة انا لا أقصد الاساءة لاي أحد ولوكان الأخ علي عنده مولد مايحتاج طاقة عشان يعمل زي مابيقول لازم يدينا فكرة على الأقل عن طريقة عمله إحنا طبعا مش حنسرق الفكرة هو خايف ليه مدام مش عايز يورينا الفكرة يبقى مايكتبش عن المشروع بتاعه لغاية ما ينتشر ونشوفه بالسوق(ابقو ابلوني) بدل ما يدوشنا بعدين انت يا اخ علي عضو جديد كمان زي منا عضو جديد ومافيش حد يستأصدك ونا ماحبش اهاجم حد بس ارجوكم لا نخلط بين المستحيل هندسيا والمستحيل علميا فطلوع الانسان للقمر كان مستحيل هندسيا لغياب الالة اللي توصله للقمر بس مش مستحيل علميا بينما انتاج طاقة مجانية مستحيل لأن الطاقة عبارة عن كمية مدركة تغير صورتها آه بس ماتتخلق من العدم زي ما الاخ علي يقول ,أنا عندي موسوعة اسمها بهجة المعرفة اعتقد موجودة عندكم بمصر ممكن تقرا في جزء الخامس(الانسان والعلم) واقرأ عن قانون الديناميكا الحرارية حتشوف اكثر من 14 صورة لآلات صنعها الانسان على مر التاريخ عشان تنتج طاقة مجانية وتفضل دايرة على طول ولكن بسبب وجود احتكاك في كراسي التحميل يبقى الشافت ده مش حيدور على طول ويستنفذ الطاقة المختزنة فيه تقدر تقولي يا اخ علي المولد بتاعك مش فية كراسي تحميل تعمل فقد في الطاقة يبقى المولد بتاعك حايشتغل على طول ازاي؟والفقود الموجودة على شكل حرارة في كراسي التحميل حتعمل بيها ايه؟

يا جماعه كل الكلام ده صحيح ويصعب تصديقه عمليا للاسباب اللى الاخ zaman وضحها واسباب تانيه كتير منها مثلا كتلة الحاجة اللى بدور زى المروحة والمائع اللى الماتور بيلف فيه والحاجات دى طبعا محتاجه قوة فى الاتجاة المعاكس علشان تتغلب عليها والماتور بيدور لكن هنخسر ايه لما نشوف وعلى فكرة انا كلمت المهندس احمد عبد الوهاب واطلعنى على طلب براءة الاختراع اللى قدمه هو واخوه

برضه يا جماعة انا مش فاهم ايه هيكون غرضي اني اكذب عليكم؟
هل انا مجنون…ام اريد شهرة؟
المحرك اشتغل امامي و انا عارف انه في علماء كتير حاولوا و صنعوا نماذج و فشلت عشان كده اول ما الفكرة اكتملت نظريا جربتها عمليا و الحمد لله اشتغلت تمام
يعني انا عارف انه القوانين بتعارض ده…بس انا اعمل ايه في المحرك اللي شغال امامي! يعني اكسّره و ارميه عشان بيعارض القوانين؟

لا تعليق وبانتظار المولد المعجزة بتاع الاخ علي وللعلم فأن طرق انتاج الطاقة الكهربائية في الدنيا كلها خمس طرق بس وأي طريقة مستخدمة لأنتاج الطاقة الكهربائية عي متفرعة من الطرق دي ويا ريت تقرى الكلام المكتوب تحت

HOW VOLTAGE IS PRODUCED
It has been demonstrated that a charge can be produced by rubbing a
rubber rod with fur. Because of the friction involved, the rod acquires electrons from the fur, making it negative; the fur becomes positive due to the loss of electrons. These quantities of charge constitute a difference of potential between the rod and the fur. The electrons which make up this difference of potential are capable of doing work if a discharge is allowed to occur.
To be a practical source of voltage, the potential difference must not be allowed to dissipate, but must be maintained continuously. As one electron leaves the concentration of negative charge, another must be immediately provided to take its place or the charge will eventually diminish to the point where no further work can be accomplished. A VOLTAGE SOURCE, therefore, is a device which is capable of supplying and maintaining voltage while some type of electrical apparatus is connected to its terminals. The internal action of the source is such that electrons are continuously removed from one terminal, keeping it positive, and simultaneously supplied to the second terminal which maintains a negative charge.
Presently, there are six known methods for producing a voltage or electromotive force (emf). Some of these methods are more widely used than others, and some are used mostly for specific applications. Following is a list of the six known methods of producing a voltage.

1-Voltage Produced by Pressure

One specialized method of generating an emf utilizes the characteristics of certain ionic crystals such as quartz, Rochelle salts, and tourmaline. These crystals have the remarkable ability to generate a voltage whenever stresses are applied to their surfaces. Thus, if a crystal of quartz is squeezed, charges of opposite polarity will appear on two opposite surfaces of the crystal. If the force is reversed and the crystal is stretched, charges will again appear, but will be of the opposite polarity from those produced by squeezing. If a crystal of this type is given a vibratory motion, it will produce a voltage of reversing polarity between two of its sides. Quartz or similar crystals can thus be used to convert mechanical energy into electrical energy. This phenomenon, called the PIEZOELECTRIC EFFECT, is shown in figure 1-20. Some of the common devices that make use of piezoelectric crystals are microphones, phonograph cartridges, and oscillators used in radio transmitters, radio receivers, and sonar equipment. This method of generating an emf is not suitable for applications having large voltage or power requirements, but is widely used in sound and communications systems where small signal voltages can be effectively used.


Figure 1-20. - (A) Noncrystallized structure; (B) crystallized structure; © compression of a crystal; (D) decompression of a crystal.
Crystals of this type also possess another interesting property, the “converse piezoelectric effect.” That is, they have the ability to convert electrical energy into mechanical energy. A voltage impressed across the proper surfaces of the crystal will cause it to expand or contract its surfaces in response to the voltage applied.


2-Voltage Produced by Heat

When a length of metal, such as copper, is heated at one end, electrons tend to move away from the hot end toward the cooler end. This is true of most metals. However, in some metals, such as iron, the opposite takes place and electrons tend to move TOWARD the hot end. These characteristics are illustrated in figure 1-21. The negative charges (electrons) are moving through the copper away from the heat and through the iron toward the heat. They cross from the iron to the copper through the current meter to the iron at the cold junction. This device is generally referred to as a THERMOCOUPLE


Figure 1-21. - Voltage produced by heat.
Thermocouples have somewhat greater power capacities than crystals, but their capacity is still very small if compared to some other sources. The thermoelectric voltage in a thermocouple depends mainly on the difference in temperature between the hot and cold junctions. Consequently, they are widely used to measure temperature, and as heat-sensing devices in automatic temperature control equipment. Thermocouples generally can be subjected to much greater temperatures than ordinary thermometers, such as the mercury or alcohol types.


3-Voltage Produced by Light

When light strikes the surface of a substance, it may dislodge electrons from their orbits around the surface atoms of the substance. This occurs because light has energy, the same as any moving force.
Some substances, mostly metallic ones, are far more sensitive to light than others. That is, more electrons will be dislodged and emitted from the surface of a highly sensitive metal, with a given amount of light, than will be emitted from a less sensitive substance. Upon losing electrons, the photosensitive (light-sensitive) metal becomes positively charged, and an electric force is created. Voltage produced in this manner is referred to as a PHOTOELECTRIC VOLTAGE.
The photosensitive materials most commonly used to produce a photoelectric voltage are various compounds of silver oxide or copper oxide. A complete device which operates on the photoelectric principle is referred to as a “photoelectric cell.” There are many different sizes and types of photoelectric cells in use, and each serves the special purpose for which it is designed. Nearly all, however, have some of the basic features of the photoelectric cells shown in figure 1-22.


Figure 1-22. - Voltage produced by light.
The cell (fig. 1-22 view A) has a curved light-sensitive surface focused on the central anode. When light from the direction shown strikes the sensitive surface, it emits electrons toward the anode. The more intense the light, the greater the number of electrons emitted. When a wire is connected between the filament and the back, or dark side of the cell, the accumulated electrons will flow to the dark side. These electrons will eventually pass through the metal of the reflector and replace the electrons leaving the light-sensitive surface. Thus, light energy is converted to a flow of electrons, and a usable current is developed.
The cell (fig. 1-22 view B) is constructed in layers. A base plate of pure copper is coated with light-sensitive copper oxide. An extremely thin semitransparent layer of metal is placed over the copper oxide. This additional layer serves two purposes:
1. It permits the penetration of light to the copper oxide.
2. It collects the electrons emitted by the copper oxide.

An externally connected wire completes the electron path, the same as in the reflector-type cell. The photocell’s voltage is used as needed by connecting the external wires to some other device, which amplifies (enlarges) it to a usable level.
The power capacity of a photocell is very small. However, it reacts to light-intensity variations in an extremely short time. This characteristic makes the photocell very useful in detecting or accurately controlling a great number of operations. For instance, the photoelectric cell, or some form of the photoelectric principle, is used in television cameras, automatic manufacturing process controls, door openers, burglar alarms, and so forth.

4-Voltage Produced by Chemical Action

Voltage may be produced chemically when certain substances are exposed to chemical action.
If two dissimilar substances (usually metals or metallic materials) are immersed in a solution that produces a greater chemical action on one substance than on the other, a difference of potential will exist between the two. If a conductor is then connected between them, electrons will flow through the conductor to equalize the charge. This arrangement is called a primary cell. The two metallic pieces are called electrodes and the solution is called the electrolyte. The voltaic cell illustrated in figure 1-23 is a simple example of a primary cell. The difference of potential results from the fact that material from one or both of the electrodes goes into solution in the electrolyte, and in the process, ions form in the vicinity of the electrodes. Due to the electric field associated with the charged ions, the electrodes acquire charges.


Figure 1-23. - Voltaic cell.
The amount of difference in potential between the electrodes depends principally on the metals used. The type of electrolyte and the size of the cell have little or no effect on the potential difference produced.
There are two types of primary cells, the wet cell and the dry cell. In a wet cell the electrolyte is a liquid. A cell with a liquid electrolyte must remain in an upright position and is not readily transportable. An automotive battery is an example of this type of cell. The dry cell, much more commonly used than the wet cell, is not actually dry, but contains an electrolyte mixed with other materials to form a paste. Flashlights and portable radios are commonly powered by dry cells.
Batteries are formed when several cells are connected together to increase electrical output.


5-Voltage Produced by Magnetism

Magnets or magnetic devices are used for thousands of different jobs. One of the most useful and widely employed applications of magnets is in the production of vast quantities of electric power from mechanical sources. The mechanical power may be provided by a number of different sources, such as gasoline or diesel engines, and water or steam turbines. However, the final conversion of these source energies to electricity is done by generators employing the principle of electromagnetic induction. These generators, of many types and sizes, are discussed in other modules in this series. The important subject to be discussed here is the fundamental operating principle of ALL such electromagnetic-induction generators.
To begin with, there are three fundamental conditions which must exist before a voltage can be produced by magnetism.
1. There must be a CONDUCTOR in which the voltage will be produced.
2. There must be a MAGNETIC FIELD in the conductor’s vicinity.
3. There must be relative motion between the field and conductor. The conductor must be moved so as to cut across the magnetic lines of force, or the field must be moved so that the lines of force are cut by the conductor.

In accordance with these conditions, when a conductor or conductors MOVE ACROSS a magnetic field so as to cut the lines of force, electrons WITHIN THE CONDUCTOR are propelled in one direction or another. Thus, an electric force, or voltage, is created.
In figure 1-24, note the presence of the three conditions needed for creating an induced voltage.


Figure 1-24. - Voltage produced by magnetism.
1. A magnetic field exists between the poles of the C-shaped magnet.
2. There is a conductor (copper wire).
3. There is a relative motion. The wire is moved back and forth ACROSS the magnetic field.

In figure 1-24 view A, the conductor is moving TOWARD the front of the page and the electrons move from left to right. The movement of the electrons occurs because of the magnetically induced emf acting on the electrons in the copper. The right-hand end becomes negative, and the left-hand end positive. The conductor is stopped at view B, motion is eliminated (one of the three required conditions), and there is no longer an induced emf. Consequently, there is no longer any difference in potential between the two ends of the wire. The conductor at view C is moving away from the front of the page. An induced emf is again created. However, note carefully that the REVERSAL OF MOTION has caused a REVERSAL OF DIRECTION in the induced emf.
If a path for electron flow is provided between the ends of the conductor, electrons will leave the negative end and flow to the positive end. This condition is shown in part view D. Electron flow will continue as long as the emf exists. In studying figure 1-24,it should be noted that the induced emf could also have been created by holding the conductor stationary and
moving the magnetic field back and forth.
يعني المختصر المفيد ياخوانا ان اتتاج الطاقة الكهربائية يتم من خلال الطرق الخمسة التالية

1. FRICTION - Voltage produced by rubbing certain materials together.
2. PRESSURE (piezoelectricity) - Voltage produced by squeezing crystals of certain substances.
3. HEAT (thermoelectricity) - Voltage produced by heating the joint (junction) where two unlike metals are joined.
4. LIGHT (photoelectricity) - Voltage produced by light striking photosensitive (light sensitive) substances.
5. CHEMICAL ACTION - Voltage produced by chemical reaction in a battery cell.
6. MAGNETISM - Voltage produced in a conductor when the conductor moves through a magnetic field, or a magnetic field moves through the conductor in such a manner as to cut the magnetic lines of force of the field.

وعشان ننتج طاقة يبقى لازم ننتجها بكفاءة كويسة والكفاءة لأي شيئ في الدنيا هي ناتج قسمة ماتم الحصول عليه من طاقة مقسوما على ما تم فقده من الطاقة وبالتالي عايزين الاخ علي يقولنا الكفاءة بتاعة المولد بتاعة تتحسب ازاي ؟

ياشباب أنا إخترعت آلة جديدة لتقوم بعدة أعمال فهي ماكينة حلاقة (رجالي) … وطاحونة بن… وعلاقة ملابس … وكرسي… وأحياناً… دراجة نارية… وأحياناً أخرى …زو…
تحياتي للجميع