# G-codes for milling

**URL:** <https://almohandes.org/t/g-codes-for-milling/1205>\
**Category:** ماكينات التحكم الرقمي\
**Created:** [11 يوليو 2006، 3:30م UTC](https://almohandes.org/t/g-codes-for-milling/1205 "2006-07-11T15:30:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Abdelzaher\_Saied](https://almohandes.org/user_avatar/almohandes.org/abdelzaher_saied/32/16883_2.png) [@Abdelzaher\_Saied](https://almohandes.org/u/Abdelzaher_Saied)\
**Post date:** [11 يوليو 2006، 3:30م UTC](https://almohandes.org/t/g-codes-for-milling/1205/1 "2006-07-11T15:30:33Z")

</div>

## G-codes for milling

G0 or G00  
Rapid movement

G1 or G01 or L  
Linear interpolation

G2 or G02 or DR-  
Clockwise interpolation

G3 or G03 or DR+  
Anti-clockwise interpolation

G40  
Turns off cutter compensation

G41  
Cutter compensation to the left

G42  
Cutter compensation to the right

G92  
Zero point displacement

G87  
Rectangular pocket milling

G81, G82, G83, G84  
Drill cycle

G90  
Absolute programming

G91  
Incremental programming

G25  
Subprogram call

G26  
Separate subprograms (disk)

G94  
Feed rate in mm/min

G95  
Feed rate in mm/revolution

G54  
Zero point 1

G55  
Zero point 2

G56  
Zero point 3

G57  
Zero point 4

G58  
Zero point 5

G59  
Zero point 6

G53  
No zero point displacement

---

<div class="post-metadata">

**Author:** ![thaers3d](https://almohandes.org/letter_avatar_proxy/v4/letter/t/a9adbd/32.png) [@thaers3d](https://almohandes.org/u/thaers3d)\
**Post date:** [28 يناير 2007، 1:05ص UTC](https://almohandes.org/t/g-codes-for-milling/1205/2 "2007-01-28T01:05:12Z")

</div>

الشكر الجزيل لك اخي عبد الظاهر

---

<div class="post-metadata">

**Author:** ![system](https://almohandes.org/uploads/default/original/3X/0/9/09f0459fb00cd1da72e640e541b6bc7ea9548fe8.png) [@system](https://almohandes.org/u/system)\
**Post date:** [8 فبراير 2007، 8:38ص UTC](https://almohandes.org/t/g-codes-for-milling/1205/3 "2007-02-08T08:38:55Z")

</div>

الشكر لك اخى العزيز
